THIN CUTTING HORIZONTAL BAND RESAW TS 400 - HP 40

Product description

THIN CUTTING HORIZONTAL BAND RESAW TS 400 - HP 40
In case of excessive effort or overheating of the blade, if a certain level of tolerance is exceeded, the material feed speed is automatically cutted in half and then stopped if the effort is prolonged. Stopping the saw prevents problems/damages.
Specification:
1)MAXIMUM MATERIAL SIZE(W X H):420x200mm
2)DISTANCE FROM BLADE TO CONVEYOR :5/64"~6"(2~150mm)
3)MINIMUM CUT PIECE : 2mm
4)SAW WHEEL DIAMETER : 32" x2(800mm x2)
5)SAWBLADE LENGTH :5500mm
6)SAWBLADE WIDTH :50mm
7)SAWBLADE SPEED 17-34 m/s
8)FEED SPEED (VARIABLE) : 0~25 m/min ***
9)CONVEYOR BELT SIZE :400x4200mm
10)SAW WHEEL MOTOR :40HP WITH INTERVER
11)FEED MOTOR :2HP WITH INVERTER
12)BLADE LIFT MOTOR : 2HP
13)DUST HOOD OUTLET DIAMETER :125mm x2
14)NET/GROSS WEIGHT :3100kgs
15)MACHINE SIZE :278x220x210CM
16) SPECIAL DEVICE "OFFSET":
After each cut the blade automatically comes down according to the measure, which the operator has set up in the PLC control. Therefore, it is possible to cut the timber from the top to the bottom and this increases cutting speed and precision
DEVICE "DOUBLE SPEED":
Thanks to a special sensor, the machine starts to cut the timber at a low speed, immediately after the saw-blade is inside the wood the cutting speed increases and this raises speed, precision and blade working hours

****STANDARD EQUIPMENT****
1.PLC CONTROL WITH TOUCH SCREEN (SCHNEIDER)
2.Air loaded pressure roller
3.Slow cutting start function
4.Spraying jets for blade lubrication
5.Documentation on english
6.HIGH ACCURACY HYDRAULIC BLADE TENSION SYSTEM
7.OIL MIST COOLING SYSTEM